| Description: Albatross On Board Module
ALBA-ENGINE - NMEA 2000
Engine Monitoring Interface for Engines without a Digital Interface
The Albatross Alba-Engine module
transforms data from analogue monitoring sensors to the digital format NMEA 2000
in order to display it locally or remotely. The wide catalogue of sensors which
are compatible with the Albatross modules makes possible a scalable and tailored
solution for each vessel.
Alba-Engine monitors RPM, oil and
boost pressure, coolant and oil temperature and alternate voltage by translating
the measurements into the NMEA 2000 communication protocol.
The RPM measurement is made through
the W signal of the alternator or by means of the impulses generated by a
magnetic sensor. Standardized resistive sensors measure pressures and
temperatures. Alba-Engine is directly connected to the alternator voltage.

|
ALBA-ENGINE SPECIFICATIONS |
|
|
Inputs |
Magnetic Sensor / W Signal |
|
|
|
4 x Resistive Sensor (0 to 250 Ohm) |
|
|
|
Voltage DC: max. 32V DC |
|
|
|
|
|
|
|
Accuracy |
RPM: ±100rpm |
|
|
|
Resistive Sensor: 1% |
|
|
|
Voltage DC: 1% |
|
ALBA-ENGINE NMEA2000 Parameter Group
Numbers (PGN’s) |
|
|
Periodic |
|
|
|
|
|
PGN127488 Eng.Pa. Rapid Update |
|
|
|
PGN127489 Eng. Param. Dynamic |
|
|
Information |
|
|
|
|
|
PGN 126464 Tx/Rx PGN List |
|
|
|
PGN 126996 Product Information |
|
|
Control |
|
|
|
|
|
PGN 059392 ISO Acknowledge |
|
|
|
PGN 059904 ISO Request |
|
|
|
PGN 060928 ISO Address Claim |
|
|
|
PGN 126208 NMEA Request Group |
|
|
|
PGN 126720 Proprietary fast-packet |
|
ALBA-ENGINE ELECTRICAL |
|
|
Voltage |
9-16V DC bus NMEA |
|
|
Consumption |
<140mA |
|
|
|
Equivalent Charge |
3 LEN according to NMEA2000 |
|
ALBA-ENGINE MECHANICAL |
|
|
Size |
143mm x 86mm x 38mm |
|
|
Weight |
230g |
|
|
|
Assembly |
Surface, fixation by screws |
|
|
Box Material |
Polycarbonate UL94V0 |
|
ALBA-ENGINE ENVIRONMENTAL |
|
|
IP Rating |
IP54 |
|
|
|
Operating Temp. |
-15ºC to +55ºC |
|
|
Stored Temp. |
-25ºC to +85ºC |
|
|
Humidity |
93% HR @ 40ºC IEC60945-8.3 |
|
|
Vibration |
2-13.2Hz @ ±1mm |
|
|
|
13.2-100Hz @ 7m/s2 IEC60945-8.7 |
|
|
Corrosion |
4x7 days @40ºC, 95% RH after 2h salt
spray |
|
|
|
per IEC60945-8.12 |
|
|
E.M.C. |
Emission IEC60945-9 |
|
|
|
Immunity IEC60945-10 |
Specification Data Sheet
Installation Manual |