Airmar NMEA 0183 Marine Based WeatherStation (no Relative Humidity) - RS422 - w/Heater - WS-220WX-HTR

Airmar NMEA 0183 Marine Based WeatherStation (no Relative Humidity) - RS422 - w/Heater - WS-220WX-HTR

Model 44-856-1-01

• Relative Humidity (RH) not available on heater models
• Cables sold separately
• Heater requires 24VDC

Features

The Model 220WXH is Airmar’s solution for commercial fishing weather monitoring applications. Thermostatically controlled heating system for operation in ice-prone areas. Feature rich, in a durable, rugged, small footprint that is IPX4 or IPX6 rated; the model 220WXH calculates the theoretical wind speed and direction based upon the apparent wind, speed of the vessel, and vessel heading.

The Model 220WXH internal 10Hz GPS and three-axis electronic compass provide heading, position, speed over ground and course over ground functionality that is required for theoretical wind data processing and mobile applications. Equipped with a 3D compass with dynamic stabilization provided by the 3-axis rate gyro also enhances the rate of turn data.

• Apparent and theoretical wind speed and direction
• Thermostatically controlled heater element
• Barometric pressure
• Air and wind chill temperature
• GPS position, speed over ground, course over ground
• Three-axis solid-state compass with dynamic stabilization
• Three-axis rate gyro – rate of turn
• Three-axis accelerometer – best-in-class pitch & roll performance
• Output: Via a single cable (various lengths available)
  • NMEA 0183/Serial protocol over RS-422 standard interface OR RS232 interface
  • NOTE: The 220WXH CANNOT be used with an NMEA2000^® CAN bus network

Specifications

•  Wind Speed
• Range: 0-40 m/s
• Accuracy: 5% @ 10 m/s (@4 angles)
• Resolution: 0.1 m/s
• Units: m/s
• Calculations: User configurable damping
• Wind Direction
• Range: 0° to 359.9°
• Accuracy: ±3° @ 10 m/s
• Resolution: 0.1°
• Calculations: User configurable damping
• Air Temperature
• Range: -40° to 80°C
• Accuracy: ±1.1°C @ 20°C
• Resolution: 0.1
• Units: °C
• Barometric Pressure
• Range: 300 to 1100 hPa
• Accuracy: ±0.5 hPa @ 25°C (or better)
• Resolution: 0.1 hPa
• Three Axis Compass
• Range: 0 to 359.9°
• Accuracy: 1° RMS when level, 1° static heading accuracy; 2° dynamic heading accuracy
• Resolution: 0.1°
• Pitch & Roll
• Measurement Type: MEMS
• Range: 50°
• Accuracy: ±1° in range of ±30°
• Resolution: 0.1°
• Units: Degrees
• GPS Position Accuracy: 3 m (10') CEP
• Operating Temperature Range: -25°C to 55°C
• Heater Operating Temperature Range: -40°C to 55°C
  Heater cycles on when sensor reaches 1°C
• Power
• Supply Voltage: 12 VDC to 24 VDC
• Supply Current (@ 24 VDC): <38 mA (<0.9 W), LEN 2 — 220WXH
• Heater Supply Current (@ 24 VDC): <2.5 A (<60 W)
• Output Rate: User specified, 0.1 seconds – fastest interval
• Weight: 300 grams (0.8 lb)
• Communications
• Available Hardware Interfaces: Serial RS232, Serial RS422
• Available Protocols: Comma delimited ASCII, NMEA 0183
• Mounting Thread Size on Base: Standard 1”-14 UNS (3/4” NPT optional)
• Certifications and Standards: CE, IPX6 (Relative Humidity/IPX4), RoHS, IEC61000-4-2, IEC60945, IEC60950_1C, IEC60950_22A, EN55022, EN55024, EN15014982

Relative Humidity (RH) not available on heater models
Cables sold separately
Heater requires 24VDC