BatteryMINDer 6 Volt 1.33 Amp (6V 1.33A) Charger-Maintainer-Desulfator 12106

12/11/18 - Discontinued by manufacturer.  No replacement has been offered.

BatteryMINDer 6 Volt 1.33 Amp (6V 1.33A) Charger-Maintainer-Desulfator 12106

BatteryMINDer® 12106 is a 2 stage charger/maintainer/desufator that extends performance and life of 6 Volt lead acid batteries including flooded (filler cap, maintenance-free, valve regulated lead-acid [VRLA], sealed lead-acid [SLA]), starter, deep cycle and hybrid. It automatically dissolves harmful power-robbing sulfation using safe, low voltage, patented high-frequency pulse technology. Can be left connected for extended, non-use periods without overcharging. Unit can maintain up to four batteries at one time (6 Volt batteries in parallel) when connected in parallel by using SmarTechnology™ Y-Connectors (part# 210AY ) or customer supplied 18-Gauge insulated wire.2 Not for gel or aviation batteries. 

Features:

• Charges and maintains your battery without overcharging it, guaranteed.
• Features two stage charging program: Charge and Float-Maintenance with desulfation in both stages (full-time.)
• Utilizes full-time battery monitoring to automatically test the battery several times a second, supplying only the current needed to maintain battery at full charge.
• Utilizes safe variable high frequency pulse desulfation to dissolve both old and newly formed sulfate from battery's plates that prevent the batteries from holding a full charge. To read more about the effects of sulfation on batteries, see the Proprietary Desulfation section on our Knowledge section.
• Maximizes battery life and capacity; reconditions weak batteries.
• Provides short circuit, spark and polarity protection.
• Reduces the need to add water to maintenance-type batteries during long, non-use storage.
• Costs less than 10¢ per month for full time maintenance.
• Shows if connections are correct via charge indicator and “blinks” when battery reaches full charge.
• Allows battery to be stored safely at 0º to 120º F providing they were previously maintained using a BatteryMINDer®.
• Charges/maintains up to 4 batteries at a time (6 Volt batteries in parallel.) Requires use of Y-Connectors 210AY  (sold separately) or customer supplied 18 gauge wire.2
• Includes 11’ DC cord with quick connector.
• Backed by the manufactuer's 1 year 100% money back guarantee and 5 year 100% parts and labor “No Hassle” warranty.

Included Accessories:

2’ Battery Clip Cord Set with Quick Connector
2’ Fused Ring Terminal Cord Set with Quick Connector

Volts: 6V
Amps: 1
Power Source: 120 VAC, 50 - 60hz
Works with: All sizes, types and brands of 6 Volt lead-acid batteries
Temperature Compensation: No
Multiple Batteries (#): 4

VDC Electronics' 1 Year 100% Money Back Guarantee, 5 Year “No Hassle” Warranty
Including but not limited to: flooded (filler cap, maintenance-free, valve regulated lead-acid [VRLA], sealed lead-acid [SLA]), starter, deep cycle and hybrid.  Not for use with gel or aircraft batteries. 

Never connect two or more batteries together before fully charging each and checking its condition. Failure to fully charge each battery and check its condition can result in a serious safety hazard.

Important:  Never use a charger without temperature compensation if your battery compartment is above 90°.  Please contact our tech support department for more information.