ComNav Voyager X3 Class A AIS Transceiver - IMO/WHEELMARK/INLAND WATER APPROVED - 21410002
Voyager X3 Class A AIS Transceiver - Automatic Identification System
- Compact single box design
- NMEA 2000 standard for marine networking (available via software update in late 2010)
- Approval: FCC and USCG standard in USA, Wheel Mark/MED,IEC certified in Canada
- Advanced technological design for enhanced performance & reliability
- Display graphically AIS data target overlay on standard radars and multifunction chart displays
- Wireless exchange — Navigation status between vessels and shore traffic monitoring centers
- Monitor vessels of Class A and Class B over standard VHF data transmissions
- Port traffic management — using Class A and Class B data to identify and control vessel movements
- Transmit safety related messages reducing search and rescue times
- Rotary encoder for quick selection and data entry using two soft keys
- Easily upgradeable through PC software via RS232 — 9 way D type connector
- Built in 16 Channel GPS receiver with antenna
- High contrast mono-chrome LCD for clear presentation of data
- Dual mode Class A/Inland AIS configurable via built-in menu
- International certification to IEC61993-2 and inland waterways standards
- Fully compatible with ComNav Vector G2/G2B GPS Compasses
- 1 Year warranty
- Worldwide service
ADDITIONAL FEATURES:
- Auto configuration and set up software
- Data display for MMSI, vessel name, call sign, vessel type, etc.
- Auto configuration for safety related message
- GPS display of position, COG and SOG
- GPS diagnostics and satellite signal bar chart
- Key status indicators
- Shows Transponder software and firmware version
- Displays receiver and transmitter statistics
- Displays Class A, Class B, base station and A to N target data
- Real time display for serial data output
- Ability to log data to file
SPECIFICATIONS:
- Operating Voltage: 12 to 24 VDC
- Power Consumption: 10 watts average, 4.75A peak at 12VDC
- NMEA0183 Interface: 38.4k baud bi-directional
- RS232 Interface: 38.4k baud bi-directional
- Operating Temperature: -15ºC to +55ºC
CONNECTIONS
- VHF Antenna connector: SO-239 (UHF)
- GPS Antenna connector: TNC
- RS232 Data connector: 9 way D type
- IEC61162 interfaces & alarm relay:
- Via 50 way D-type junction box.
- Power connector: LTWBB-04PMMS-LC7001
- NMEA 2000 connector: LTWBD-05PMMs-LC7001
VHF TRANSCEIVER
- Transmitter: Single
- Receivers: Three (two AIS and one DSC channel 70)
- Frequency Range: 156.025MHz – 162.025MHz
- Channel Bandwidth: 25KHz
- Power Output: 41dBm +/- 1.5dB
- Modulation: 25KHz GMSK / 25KHz AFSK
- Data Rate: 9600 bps GMSK & 1200 bps FSK
- RX Sensitivity: <-107dBm @ 20% PER
- Compliance: FCC, USCG, Type EU, IEC, CE, RoHs
Standards and Approvals:
- CCNR/ZKR Inland AIS Requirements
- IEC60945 Edn. 4.0 Environmental requirements
- IEC61993-2 Class A Shipborne equipment
- IECIEC61162-1/2 Edn.2.0 Digital interfaces
- EC61108-1 GPS Receiver equipment
- ITU-RM.1371-3 Universal AIS Technical Characteristics
- NMEA2000 Standard for marine networking
ComNav Voyager X3 Class A AIS Transceiver - IMO/WHEELMARK/INLAND WATER APPROVED - 21410002 - Brochure (ComNav_Voyager_X3.pdf, 0) [Download]
ComNav Voyager X3 Installation and Operation Manual (P/N 29010085) (29010085_v1r0_Voyager_X3_Installation_Operation_Manual.pdf, 3,924 Kb) [Download]