I n n o v a t i v e M a r i n e P r o d u c t s f o r t h e I n f o r m e d S e a f a r e r - S i n c e 1 9 9 5
Call Us at 952-920-8500 M-F 9A-5P CST
Yamaha engine interface cable 4.5 m (15 ft) and T-connector
Yamaha® Engine Connection for NMEA 2000® Messages
Many Yamaha outboard engines have the ability to output engine data to a NMEA 2000® network. This output from the engine can be displayed on Navico Multi-Function Displays such as the Lowrance HDS, Lowrance LMF-200 and 400 gauges, the Simrad NSS/NSE/NSO the B&G Zeus as well as NMEA 2000 Compatible displays from other manufacturers. The vessel must be equipped with an existing or new NMEA 2000® network (backbone) or one must be installed. (See Buy Together Tab above)
Connects to Yamaha engines without Yamaha CommandLink Plus system.
2006 & newer: F50, T50, F60, T60, F75, F90, F115, LF115, F150, LF150, F200, LF200, F225, F225, F250, LF250.
2006 & newer: Z150, LZ150, VZ150, Z175, Z200, LZ200, VZ225, Z250, LZ250, VZ250, Z300, LZ300, VZ300.
Outputs:
Yamaha 4-Stroke 50-250 | 2-Stroke HDPI 150-350 (Z or VZ models)
RPM
Alternator
Voltage
Engine Hours
Engine Temperature
Fuel Pressure
Fuel Rate
Oil Pressure
Trim*
Water Pressure
*Digital trim must be connected by a Yamaha dealer.
*Requires NMEA 2000 network. Kit includes T-connector to connect to a new or existing NMEA 2000 network. Add NMEA 2000 starter kit, part number 000-0124-69, if a network is not already installed.
Works with: NMEA 2000 Compliant Units
NavStore
Customer Service
Terms and Policies
This site uses cookies to store information on your computer. For further details see our cookie policy in the Privacy Policy link at the bottom of the page .
Ok