{"product_id":"yacht-devices-tank-adapter-ydta-04n","title":"Yacht Devices Tank Adapter YDTA-04N","description":"\u003cfigure\u003e\u003cimg src=\"https:\/\/www.yachtd.com\/static\/img\/b\/tank_adapter_ydta01.png\"\u003e\u003c\/figure\u003e\n\u003ch1\u003eTank Adapter YDTA-04\u003c\/h1\u003e\n\u003cp\u003eIt allows to connect up to four tanks at the same time, but can be ordered with NMEA 2000 Micro Male connector only. The Device is equipped with a hidden button that allows switching among 15 configuration presets. For typical use cases, it allows to configure the Device in seconds!\u003c\/p\u003e\n\u003cp\u003eHowever, for advanced configuration (calibration curves, digital switching functions, connection in parallel with analog gauges, using voltage sensors) the NMEA 2000 PC gateway (from any manufacturer) is required. \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Adapter can be configured to report one of the seven fluid types defined in the NMEA 2000 standard: Diesel Fuel, Gasoline Fuel, Oil, Fresh Water, Waste Water, Black Water (Sewage), or Live Well. The tank number can be configured up to 16 tanks of one type are allowed in an NMEA 2000.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe Device can be used with European (10 to 180 Ohm range), American (240 to 33 Ohm range) or Japanese (0 to 310 Ohm range) standard fluid level sensors as well as with any nonstandard sensors with maximum resistance less than 400 Ohm.\u003c\/p\u003e\n\u003cp\u003eFirmware updates are available only with Yacht Devices gateways (Wi-Fi, USB or Ethernet).\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.yachtd.com\/static\/img\/g\/YDTA04\/YDTA04_Front_1280x960.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePicture 1. Tank Adapter YDTA-04N \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThe Adapter can be installed as a standalone measuring device, in parallel with an existing analog gauge (2-coils and 1-coils gauges are supported) see Picture 2), or in parallel with a Volvo Penta engine's MDI (Mechanical Diesel Interface) box. If you have a combined gauge where you choose the value to display with a button, the Adapter will smoothly work with it, too. The four measuring channels of the Device may have individual settings. Fluid tank level sensor readings can be calibrated with 12 calibration points to get accurate readings on tanks of any shape.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.yachtd.com\/static\/img\/1coil_2coil_gauges.png\"\u003e\u003cimg alt=\"Connection in parallel with an exitsting analog gauge\" src=\"https:\/\/www.yachtd.com\/static\/img\/1coil_2coil_gauges.png\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePicture 2. Connection in parallel with an existing analog 1-coil (left) and 2-coil (right) gauges: (1) - YDTA, (2) - Gauge, (3) - Fluid sensor, (4) - Optional button, (5) and (6) - Other sensors (optional)\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThe Device is equipped with a hidden button that allows switching among 15 configuration presets (see\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.yachtd.com\/downloads\/ydta04.pdf\"\u003eSection V of the Manual\u003c\/a\u003e). However, for advanced configuration (calibration curves, digital switching functions, connection in parallel with analog gauges, using voltage sensors) the NMEA 2000 PC gateway (from any manufacturer) or MFD which allows editing of installation description strings is required. Firmware updates are available only with Yacht Devices gateways (Wi-Fi, USB or Ethernet).\u003c\/p\u003e\n\u003cp\u003eIn the settings you can join several tanks for correct calculation of \"Estimated Fuel Remaining\" data for PGN 127496 \"Trip Fuel Consumption, Vessel\" which displays the sum of the fuel volume in selected tanks.\u003c\/p\u003e\n\u003cp\u003eThe Adaptor can switch the load channels of NMEA 2000 digital switching equipment on or off. Up to eight different conditions for each measuring channel can be used. For example, the Adapter can\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.yachtd.com\/news\/low_fuel_alarm.html\"\u003eturn on and off digital switching equipment\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e(the same as YDTA-01 model), e.g. alarm you with the\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.yachtd.com\/news\/low_fuel_alarm.html\"\u003eAlarm Button\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eor turn on pump with the\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.yachtd.com\/products\/circuit_control.html\"\u003eCircuit Control\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThe Device is powered from the NMEA 2000 network and provides high voltage galvanic isolation between NMEA 2000 and sensor inputs.\u003c\/p\u003e\n\u003cp\u003eUse with our other products:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ethe Adapter can \u003ca href=\"https:\/\/www.yachtd.com\/news\/low_fuel_alarm.html\"\u003eturn on and off digital switching equipment\u003c\/a\u003e, e.g. alarm you with the \u003ca href=\"https:\/\/www.yachtd.com\/news\/low_fuel_alarm.html\"\u003eAlarm Button\u003c\/a\u003e or turn on pump with the \u003ca href=\"https:\/\/www.yachtd.com\/products\/circuit_control.html\"\u003eCircuit Control\u003c\/a\u003e;\u003c\/li\u003e\n\u003cli\u003ethe Adapter can record liquid level to the MicroSD card, but you can also use a recording device like our \u003ca href=\"https:\/\/www.yachtd.com\/products\/recorder.html\"\u003eVoyage Recorder\u003c\/a\u003e (see \u003ca href=\"https:\/\/www.yachtd.com\/products\/recorder\/gpx_csv.html\"\u003ethe list of data types\u003c\/a\u003e) to store data from multiple Adapters along with \u003ca href=\"https:\/\/www.yachtd.com\/products\/recorder\/gpx_csv.html\"\u003eall other vessel data\u003c\/a\u003e;\u003c\/li\u003e\n\u003cli\u003eyou can use our \u003ca href=\"https:\/\/www.yachtd.com\/products\/wifi_gateway.html\"\u003eWi-Fi Gateway\u003c\/a\u003e to see all your \u003ca href=\"https:\/\/www.yachtd.com\/news\/circular_gauges.html\"\u003etanks right from a browser\u003c\/a\u003e or marine apps;\u003c\/li\u003e\n\u003cli\u003ethe \u003ca href=\"https:\/\/www.yachtd.com\/products\/display.html\"\u003eText Display\u003c\/a\u003e with \"Engine and Tank Monitoring\" firmware support diesel, gasoline, fresh and black water tanks.\u003c\/li\u003e\n\u003cli\u003ethe Adapter can also be configured with special \"Installation Description\" strings. Some MFD's allow entering text to the device properties. This text is usually used to save installation notes, the device location or the installer's contacts. You can also enter these strings with our free \u003ca href=\"https:\/\/www.yachtd.com\/products\/can_view.html\"\u003eCAN Log Viewer\u003c\/a\u003e software, connected to NMEA 2000 with the \u003ca href=\"https:\/\/www.yachtd.com\/products\/usb_gateway.html\"\u003eUSB Gateway\u003c\/a\u003e or \u003ca href=\"https:\/\/www.yachtd.com\/products\/wifi_gateway.html\"\u003eWi-Fi Gateway\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Device is powered from the NMEA 2000 network and provides high voltage galvanic isolation between NMEA 2000 and sensor inputs.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/web.nmea.org\/Directory-Listing\/Tank-Adapter-YDTA04-5625\"\u003e\u003cimg src=\"https:\/\/www.yachtd.com\/static\/img\/nmea_2000.jpg\" width=\"15%\" align=\"left\"\u003e\u003c\/a\u003eThe Adapter is compatible with a virtually all equipment supporting NMEA 2000 and\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/web.nmea.org\/Directory-Listing\/Tank-Adapter-YDTA04-5625\"\u003eis certified by National Marine Electronics Association\u003c\/a\u003e. Raymarine SeaTalk NG, Simrad SimNet, and Furuno CAN networks are branded versions of NMEA 2000 and\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.yachtd.com\/faq\/#type\"\u003ediffer only by connector type\u003c\/a\u003e. Garmin uses the NMEA 2000 Micro connector in its devices, which is compatible with the DeviceNet Micro connector.\u003c\/p\u003e\n\u003cp\u003eThe Adapter is supplied with NMEA 2000 Micro Male connector (see the picture below). For proprietary networks, an adaptor cable may be required.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.yachtd.com\/static\/img\/ydta04_drawing.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePicture 3. Drawing of Tank Adapter\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.yachtd.com\/downloads\/ydta04.pdf\"\u003e\u003cstrong class=\"highlight\"\u003eUser Manual (PDF)\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.nmea.org\/content\/STANDARDS\/nmea_2000_certified_products?a=1\u0026amp;alpha=y\"\u003e\u003cimg align=\"left\" width=\"15%\" style=\"margin: 0px 7px 7px 0px;\" src=\"https:\/\/www.yachtd.com\/static\/img\/nmea_2000.jpg\"\u003e\u003c\/a\u003eThe Adapter is compatible with a virtually all equipment supporting NMEA 2000 and \u003ca href=\"https:\/\/www.nmea.org\/content\/STANDARDS\/nmea_2000_certified_products?a=1\u0026amp;alpha=y\"\u003eis certified by National Marine Electronics Association\u003c\/a\u003e. Raymarine SeaTalk NG, Simrad SimNet, and Furuno CAN networks are branded versions of NMEA 2000 and \u003ca href=\"https:\/\/www.yachtd.com\/faq\/#type\"\u003ediffer only by connector type\u003c\/a\u003e. Garmin uses the NMEA 2000 Micro connector in its devices, which is compatible with the DeviceNet Micro connector.\u003c\/p\u003e\n\u003cp\u003eThe Adapter is supplied with a connector compatible with SeaTalk NG or a connector compatible with NMEA 2000 Micro Male (see the picture below). For other networks, an adaptor cable may be required.\u003c\/p\u003e","brand":"Yacht Devices","offers":[{"title":"Default Title","offer_id":46583941857442,"sku":"YDTA-04N","price":249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0586\/1405\/5074\/files\/YDTA04_Front_1280x960_737df25e-7be1-479c-b6d8-cabd501d0be2.jpg?v=1770860578","url":"https:\/\/navstore.com\/products\/yacht-devices-tank-adapter-ydta-04n","provider":"NavStore","version":"1.0","type":"link"}