Maretron NMEA 2000 Switch Indicator Module SIM100-01

Maretron NMEA 2000 Switch Indicator Module SIM100-01

Maretron’s Switch Indicator Module monitors switch closure devices including, but not limited to, safety equipment (e.g., heat, smoke, carbon monoxide, explosive vapor detectors), security systems (e.g., motion, vibration, glass break, door and port hole magnetic switches), and vessel monitoring equipment (e.g., valve closed/open, high water bilge). The SIM100 continually monitors these switch closure devices and broadcasts information over the NMEA 2000® network about the switch state so the crew can be alerted to potential conditions or problems that warrant further investigation. Advanced features of the SIM100 include the ability to detect whether or not power has been disconnected from the monitored device or if the signal wires have been disconnected due to either corrosion, tampering, or for any other reason (if the monitored device is so equiped). With the SIM100, you can rest assured that critical sensors are receiving power, signal wires are connected, and all the safety, security and vessel functions are under constant supervision.

• Monitors and reports switch status
• Can detect and report problems like opens and shorts in switch circuits
• Compatible with Maretron Supplied

- Heat Detectors

- Smoke Detectors

- Carbon Monoxide Detectors

- Bilge Water Detectors

• Also Compatible With

- Magnetic Switches

- Glass Break Detectors

- Door, Hatch, and Porthole Magnetic Switches

Accessories

SH-449CSTE - Smoke/Heat Detector

CO1000-S-W - Carbon Monoxide (CO) Detector (Surface Mount White)

LP1000-S-W - Liquid Petroleum (LP) Detector (Surface Mount White)

BHW100 - Bilge High Water Detector

MD-6157-N - Motion Detector

MS-1035 - Magnetic Switch Rectangular (Indoor)

MS-1085-N - Magnetic Switch Rectangular (Outdoor)

MS-1055-N - Magnetic Switch Cylinder (Indoor/Outdoor)

MS-1075 - Magnetic Switch Recessed (Indoor/Outdoor)